ZINC ENGINE ANODE YAMAHA MARINER YMH-801100 2001801100

AED 30.00 exc. VAT

Mil-Spec Zinc anodes are designed to provide superb corrosion protection for outdrives that operate in Salt water.

Attachment Method Bolt-On
Best Use YAMAHA / MARINER
Compatibility

HP 20-25-30 Yamaha,

HP 10-50 Mariner

Manufacturer Rakicevic
Dimensions Outer diameter : 95 mm
Inner diameter : 17 mm
Height : 55 mm
Diameter fastener : 8.8 mm
Material Zinc
Shape Round plate design
Type Replacement Anode Only

Description

Yamaha Mariner Trim Tab Skeg Anode MM-801100

Product Overview : 

Anodes provide cathodic protection in varying marine environments such as salt water, freshwater, and brackish water. Our sacrificial anodes conform to the highest Mil-Spec standards and come in a variety of shapes and sizes. Depending on the type of metal and water we offer zinc, aluminum, and magnesium galvanic anodes for all of your underwater cathodic protection needs.

Marine engines are typically composed of varying metals and alloys that wear out from rust and corrosion at different rates. To lower the rate of corrosion to improve the longevity of the marine engine, zinc rods and engine anodes will be used. Commercial liners, cargo ships, private water vessels, maritime structures and shore equipment that are exposed to saltwater elements need corrosion protection to prevent untimely failure of engine components. Using Zinc Yamaha / Mariner Trim Tab Skeg Anode MM-801100 for Mariner 10-50 HP and Yamaha 20-30 HP Series, can allow equipment that is under heavy use to keep going to complete maritime operations. These sacrificial skegs are destroyed by stray electric current instead of outdrive.

Key Features

  • Provides cathodic protection to the engine and ancillaries
  • Skeg anode
  • Made for Outdrive
  • Meets or exceeds US Military Specification (MIL-A-18001K)
  • For use in Salt Water

Installation

The anode must be in direct contact with the metal it protects : never paint around an anode or the anode itself.

When Should Anodes Be Replaced ?

Anodes deterioration rate may fluctuate according to the mooring area, water salinity, PH and temperature, potential electrical failure on board, and of course, the quality of the anodes themselves.

A good benchmark for replacement is when the anode is 70-80 % dissolved. We recommend to replace anodes every year when doing the boat antifouling/launching. In all cases, anodes deterioration should always be watched carefully together with the condition of the metal parts they protect. On the opposite, anodes may dissolve quickly if they are bad quality or if there is an electrical failure on.

Please feel free to contact us if you don’t see the item you require, or if you are not sure of the anode you need.

NB : The product images shown are for illustration purposes only and may not be an exact representation of the product.

Additional information

Weight 0.210 kg