301 MINI PUMPS SET WEST SYSTEM 3109100015

AED 290.00 exc. VAT

Manufacturer WEST SYSTEM
Manufacturer Part Number 301
Type Mini Pumps Set
Mix ratio 5 parts resin : 1 part hardener

 

Description

301 MINI PUMPS SET WEST SYSTEM

Product Overview

WEST SYSTEM 301 Mini Pumps and 303 Special Ratio Mini Pumps are designed for convenient and accurate metering of resin and hardeners. For convenience, the pumps mount directly onto the resin and hardener containers, and eliminate the mess involved with measuring by weight or volume.

301 Mini Pumps are calibrated to deliver the correct working ratio of 5 parts of 105 resin to 1 part of either 205 Fast or 206 Slow hardeners. The mini pumps mount directly on the resin and hardener containers and have been calibrated to deliver an accurate working ratio.

If you are using 105 Epoxy Resin with 205 Fast Hardener or 206 Slow Hardener :

  • use the 301A set (5:1 by volume) to fit the A Pack size
  • use the 301B set (5:1 by volume) to fit the B Pack size
  • use the 301C set (5:1 by volume) to fit the C Pack size

Installation 

Prior to installation, insert the extension into the 4.8 litre and 24 litre pack RESIN pump. Remove the container lid and replace with the pump: smaller pump to hardener – larger pump to resin. Dispense the correct proportions of resin and hardener into a clean plastic, metal or wax-free paper container. Do not use glass or foam containers because of the potential hazard from exothermic heat build-up, and DO NOT attempt to adjust the cure time by altering the mix ratio. An accurate ratio is essential for a proper cure and full development of physical properties.

IMPORTANT

When metering resin and hardener, depress each pump head fully and continuously to the bottom of its stroke. Allow the pump heads to return completely, and unassisted, to the top of the stroke. DO NOT PULL IT. Partial pump strokes will give the wrong ratio. Do not attempt to adjust the cure rate by altering the ratio.

NB : The product images shown are for illustration purposes only and may not be an exact representation of the product.