Description
EPOXY RESIN / EXTRA SLOW HARDENER 105/209-B 6.45KG
Product Overview
105 Epoxy Resin 5kg
105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures. Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor. Multiple coats of a west system 105 Epoxy Resin create a superior moisture barrier and a tough, stable base for paints and varnishes. Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. With roller application, it possesses thin-film characteristics such as excellent flow out and the ability to self level without fish-eyeing.
209 Extra Slow Hardener 1.45kg
209 Extra Slow Hardener is formulated for use with WEST SYSTEM 105 Resin for general coating and bonding applications in extremely warm and/or humid conditions or when extended working time is desired at room temperature. Provides approximately twice the working time of 206 Slow Hardener. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications. Not intended for clear coating.
Pot life at 72°F (22°C): 40 to 50 minutes
Pot life at 95°F (35°C): 15 to 20 minutes
Cure to a solid state at 72°F (22°C): 20 to 24 hours
Cure to a solid state at 95°F (35°C): 6 to 8 hours
Cure to maximum strength at 72°F: 4 to 9 days
Minimum recommended temperature: 70°F (21°C)
Use Mini pumps to get the mix right.
Mixing 105 / 209 6.45kg Epoxy Resin at the correct ratio is critical. Calibrated pump sets are offered for accurate metering of all Group Size A, B, and C WEST SYSTEM and hardeners.
Choose from a variety of additives to customize the mix.
Epoxy Resin can be mixed with a variety of fillers and additives to suit specific needs, such as sag resistance, sandabilty or to increase its strength. Specific fillers also can be used to convert 105 Epoxy Resin into an excellent adhesive to suit a wide variety of bonding needs.