EPOXY RESIN/FAST HARDENER 105-A 946ML/205-A 206ML 3109100012

AED 350.00 exc. VAT

Best Use Waterproof and Bond Wood Fiberglass and Metals
Manufacturer WEST SYSTEM
Capacity  Epoxy Resin 946ml / Fast Hardener 206ml
Manufacturer Part Number 105-A  / 205-A
Type Kit
Mix ratio 5 parts resin : 1 part hardener
Associated pumps 301A




Product Overview

105 Epoxy Resin 5kg

105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures.  Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor.  Multiple coats of a west system 105 Epoxy Resin create a superior moisture barrier and a tough, stable base for paints and varnishes. Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. With roller application, it possesses thin-film characteristics such as excellent flow out and the ability to self level without fish-eyeing.

205 Fast Hardener 1kg

205 Fast Hardener is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205-A Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature. Mix it with WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties.

205 Fast Hardener is not intended for clear coating.

Pot Life at 72F (22C):
 9 to 12 minutes
Cures to a solid state: 6 to 8 hours
Cures to maximum strength: 1 to 4 days
Minimum recommended temperature: 40°F (4°C)
Mix ratio: Resin 5:1 Hardener

Use mini pumps set to get the mix right.

105-A 946ml /205-A 206ml : Mixing Epoxy Resin and hardener at the correct ratio is critical. Calibrated pump sets are offered for accurate metering of all Group Size A, B, and C WEST SYSTEM and hardeners.

Choose from a variety of additives to customize the mix.

Epoxy Resin can be mixed with a variety of fillers and additives to suit specific needs, such as sag resistance, sandabilty or to increase its strength. Specific fillers also can be used to convert 105 Epoxy Resin into an excellent adhesive to suit a wide variety of bonding needs.