EPOXY RESIN/SLOW HARDENER 105/206-B 6KG 3157100004

AED 1,300.00 exc. VAT

Best Use Waterproof and Bond Wood Fiberglass and Metals
Manufacturer WEST SYSTEM
Capacity 6kg ( Epoxy Resin 5kg / Slow Hardener 1kg )
Manufacturer Part Number 105/206-B
Type Kit
Mix ratio 5 parts resin : 1 part hardener
Associated pumps 301B




Product Overview

105 Epoxy Resin 5kg

105 Epoxy Resin is a clear, pale yellow, low-viscosity liquid epoxy resin. Blended with hardener at the proper ratio, it cures to a hard, solid plastic with superior physical properties. Based on which hardener you choose, it cures at a wide range of temperatures.  Once cured, it forms a high-strength solid that is functionally waterproof, and highly resistant to moisture vapor.  Multiple coats of a west system 105 Epoxy Resin create a superior moisture barrier and a tough, stable base for paints and varnishes. Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. With roller application, it possesses thin-film characteristics such as excellent flow out and the ability to self level without fish-eyeing.

206 Slow Hardener 1kg

206 Slow Hardener is a low-viscosity epoxy curing agent for use when extended working time or a longer cure time is needed. It also provides adequate working time at higher shop temperatures. When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, the cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. 206-B Epoxy Slow Hardener is not intended for clear coating.

Pot life at 72°F (22°C): 20 to 25 minutes
Cure to a solid state: 10 to 15 hours
Cure to maximum strength: 1 to 4 days
Minimum recommended temperature: 60°F (16°C)
Mix ratio: 5 parts resin : 1 part hardener

Use mini pumps set to get the mix right.

Mixing 105 / 206-B 6kg Epoxy Resin and hardener at the correct ratio is critical. Calibrated pump sets are offered for accurate metering of all Group Size A, B, and C WEST SYSTEM and hardeners.

Choose from a variety of additives to customize the mix.

Epoxy Resin can be mixed with a variety of fillers and additives to suit specific needs, such as sag resistance, sandabilty or to increase its strength. Specific fillers also can be used to convert 105 Epoxy Resin into an excellent adhesive to suit a wide variety of bonding needs.